如何调节激光绿光水平仪的高度

Before making adjustments, you first need to check that the equipment is working properly. Make sure that the equipment has installed the battery, and the body has not been seriously collided or damaged. If there is any abnormality, it needs to be repaired or replaced in time.

Second, adjust the height of the level
1. Find a platform

First of all, you need to find a platform to make adjustments to ensure that its foundation is smooth, no vibration or tilt. You can use a tripod or adjust the pedal to make it balanced.

2. Adjust the height of the level meter

At this time, you need to put the laser green light level on the platform and turn on the switch. Then you need to use the lifting handle of the tripod to gradually raise the height of the level meter until the laser plane is parallel to the ground or other reference plane you want to adjust.

Third, adjust the laser beam direction
1. Vertical adjustment

Aim the laser green light leveler at a vertical wall, then turn on the power and put the bottom of the leveler on the ground. Observe the position of the laser at this time, if it deviates from the wall, you need to rotate the instrument and adjust the laser direction until the laser line is perpendicular to the wall.

2.Leveling Adjustment

Place the laser green light level meter flat on a smooth table, turn on the power and observe the position of the laser. If it deviates from the reference plane, you need to rotate the instrument and adjust the laser direction until the laser line is parallel to the reference plane.

IV. Precautions
1. The height needs to be adjusted slowly in order to avoid the height being too high or too low, resulting in a loss of precision.

2. When adjusting the direction, you need to pay attention to observation and adjust gradually.

3. When using the laser green light level meter, you need to keep it clean and clean to avoid dust or moisture and other interference with the use of the instrument.

4. When using the laser green light level meter, it should be far away from the strong light source or direct sunlight.

In short, correctly adjusting the height of the laser green light level meter is very important for the measurement work, which can improve the measurement accuracy and work efficiency. When making adjustments, you need to carefully observe and patiently adjust to ensure the normal operation of the equipment.